Team project experience

Scan to BIM4D SchedulingBIM Coordination+3

$200M

Regional Hospital Tower Expansion

Prior team experience

250,000 SF

Led full VDC services for a 10-story, 250,000 SF regional hospital tower expansion, one of the most demanding project types in construction due to active-facility constraints and regulatory MEP requirements. Laser scanning of the existing structure provided accurate as-built conditions for tie-in design and clash detection against new construction. Multi-discipline MEP coordination was executed in Navisworks across mechanical, electrical, plumbing, fire protection, and medical gas systems. A 4D construction simulation was delivered to sequence phased work within the operating hospital without disrupting patient care.

Scan to BIM4D SchedulingBIM Coordination+3

$100M

Oncology Research Building

Prior team experience

100,000 SF

Led VDC for a 5-story, 100,000 SF oncology research building at a major academic medical institution, where laboratory MEP systems demand a higher level of coordination precision than standard commercial construction. Laser scanning documented existing site conditions to support accurate tie-in modeling and conflict-free installation sequencing. Multi-discipline coordination in Navisworks covered the full range of MEP systems including fume hoods, lab exhaust, specialty gases, and clean utilities specific to research environments. Constructability reviews and a 4D construction model were delivered to support the phased construction program.

civic

$40M

Historic Building Rehabilitation

Prior team experience

Scan to BIMBIM Coordination3D Modeling+2

Led VDC for the historic rehabilitation of a landmark 1911 building in Milwaukee, where existing conditions were undocumented and deviations from original drawings were expected throughout. Laser scanning was the foundation of the entire VDC program, capturing as-built conditions at millimeter accuracy to support accurate retrofit design and coordination. Scan-to-BIM conversion produced an as-built Revit model that was used for clash detection, RFI management, and constructability reviews across all disciplines. VDC support continued through conversion of the building to mixed-use civic spaces, with underground utility modeling coordinating new MEP infrastructure with the existing structure.

BIM CoordinationShop Drawings3D Modeling+1

civic

$100M

Civic Cultural Center

Prior team experience

100,000 SF

Led concrete modeling and coordination for a $100M civic cultural center, managing model quality and coordination across architectural, structural, and MEP disciplines. Weekly BIM coordination meetings were facilitated to triage the active clash list and drive resolution across trade teams. RFI management, clash detection in Navisworks, and QA/QC of specialty models and 2D drawings were delivered throughout construction. Shop drawing packages were produced from the coordinated BIM model to support fabrication and field installation.

$80M

Biomedical Research Institute

Prior team experience

Scan to BIM4D SchedulingBIM Coordination+3

Led VDC for a 5-story, 70,000 SF biomedical research facility expansion requiring precise coordination of laboratory MEP systems including clean-room HVAC, specialty exhaust, and controlled environment utilities. New construction connections to the existing facility structure were modeled and coordinated to ensure structural and MEP tie-ins were conflict-free before installation. Laser scanning documented the existing building conditions to inform accurate as-built modeling and conflict detection at the expansion interface. A 4D construction model and constructability reviews were delivered to support the phased construction schedule and minimize disruption to active research operations.

BIM Coordination4D SchedulingScan to BIM+3

hospitality

$90M

Boutique Hotel: Downtown Nashville

Prior team experience

100,000 SF

Led VDC for a 15-story, 100,000 SF boutique hotel in downtown Nashville, situated directly adjacent to two operating hotels, a site constraint that made construction sequencing and MEP coordination critical from day one. Laser scanning of the adjacent structures and shared infrastructure provided the as-built baseline needed to design connections and coordination without impacting neighboring operations. MEP coordination across all trade disciplines was executed in Navisworks, with particular attention to vertical shaft routing, mechanical penthouse layouts, and below-grade utility conflicts. A 4D construction model and constructability reviews were delivered to plan the urban site logistics and phased vertical construction.

Scan to BIMBIM Coordination

$150M

Academic Medical Center

Prior team experience

200,000 SF

Led the Scan-to-BIM program for a $150M academic medical center, converting laser scan point clouds into accurate as-built Revit models for use in renovation and expansion design. QA/QC was performed by comparing the as-built model against the registered point cloud to verify dimensional accuracy and flag deviations requiring design coordination. Ongoing coordination between BIM and construction teams ensured models were kept current as field conditions evolved, with clash views and coordination points generated to resolve conflicts between existing and new construction. The as-built Revit model served as the authoritative reference for MEP routing, structural tie-ins, and construction documentation throughout the project.

BIM CoordinationShop Drawings3D Modeling

civic

$450M

Professional Sports Complex & Stadium

Prior team experience

1,000,000 SF

Led millwork modeling and BIM coordination for a $450M professional sports complex and stadium spanning 1,000,000 SF, one of the most publicly visible project types where precision detailing and drawing accuracy directly affect fabrication quality and installation timelines. Clash detection was run in Navisworks to identify conflicts between millwork, structural, and MEP elements before shop drawings were released for fabrication. RFI management and QA/QC of specialty models ensured that design intent was accurately captured and that field teams worked from consistent, current documentation. Drawing production supported the millwork subcontractors through the full fabrication and installation cycle.

housing

$40M

Urban Residential Development

Prior team experience

BIM CoordinationShop Drawings

Led BIM coordination and constructability reviews for a $40M urban residential development, ensuring that design intent was buildable and that conflicts were resolved before reaching the field. RFI management and design change tracking kept the model synchronized with evolving design decisions throughout the construction cycle. Models were maintained with field data as construction progressed, giving the project team a reliable as-built reference for ongoing coordination and documentation. QA/QC of specialty models and 2D drawings was conducted across disciplines, and BIM coordination meetings were facilitated to align trades and resolve outstanding coordination issues.

education

$50M

Private Educational Campus

Prior team experience

BIM CoordinationShop Drawings

Led model management and BIM coordination for a $50M private educational campus from advanced design through construction document production, ensuring the BIM model remained accurate, coordinated, and buildable at every phase. Clash detection was run in Navisworks across architectural, structural, and MEP trade models to identify and resolve conflicts before they were locked into construction documents. The BIM team was guided through constructability reviews, with issues logged, assigned, and tracked to resolution to maintain schedule and drawing quality. Shop drawing packages were produced from the coordinated model, providing fabrication-ready documentation that reduced field RFIs and supported faster installation.